The construction of a single CO2 laser grid

The construction of a single CO2 laser grid When using a CO2 laser to cut a page projectile, which enters a safety zone is necessary to keep the laser on the target of about 5 seconds or more. To do this we must be able to fire the laser in a grid, therefore if the projectile or aircraft or guided missiles, or even a UAV was evasive as high-speed high "G" of 90 degrees while it is can still register a kill target. Why, what is the management which will remain in network and distribution network can re-direct the center of destination within the network until 3000, more degrees to destroy the laser it.To had fired the laser at the thought that ball is convex in shape, then the rays are the rays of the first, since each beam back at the base of a series of mirrors that focus on the grid of the box in three dimensions contain the objective is to track multiple targets. This saves energy that does not require lasers or multiple systems or energy to run and shoot down targets or more evasive goals easily overlooked, which are planned to include a random sequence to find the flight characteristics at high temperature and high frequency or high-power laser of any kind. If emissions of CO2, argon gas, helium, N2 systems and high wave energy. As targets are destroyed reconfigure the radar of the largest non-target deaths and restores the left. Until the last target is defeated. Doubling or tripling the war in Vietnam as SAM can also be a good move idea.These and work units in a team and / or focused on network configuration in the case of a malfunction or be beaten. These units can be operated by remote control and / or operations systems for border patrol or even a destroyer escorting a battleship or carrier. These systems are small enough if built could one day be able to defend in close temporal proximity of the air logistics. "Lance Winslow" - Online Think Tank forum. If you have innovative ideas and unique perspectives, we think with Lance;